Skip to content
Jarbalo Amateur Radio Association

Jarbalo Amateur Radio Association

In Memory of Mac, W0ROO

  • About
    • Serving Area
    • St. John Hospital
    • Architecture
  • Hotspots
    • YSF Configuration
    • DMR Configuration
  • JARA Room
    • JARA-KS Room EMG Function
    • Rooms/Repeaters in KC
  • Pictures
    • Send picture from computer
    • Name Photos
  • Radios
    • Firmware Version Check
      • Firmware Updates
    • Current Firmware
    • WX Alert
    • Back Up Your Radio
    • Finding Your Radio ID
    • FT5/3 Data Connections
    • Handy Files
    • Cross Band Mode
    • Bluetooth
  • Wires-X
    • Our Configuration
    • Registering your Radio for Wires-X
    • Finding a Room
    • Connecting to a Room or Node
    • Connecting Remotely via PDN
    • Disconnecting from Wires-X
    • Disconnecting from a Room or Node
  • Contact Us
  • Toggle search form

Repeater Gets Second Antenna

Posted on June 4, 2018October 12, 2020 By JARA-Admin

NEWS UPDATE! As of June 2nd, the WØROO repeater has a new configuration. There is a separate receive antenna which is filtered (half of the duplexer) and mounted on the St. John Hospital tower. The TX and RX finally do not share any coax. We had one late check in from Lawrence! That is our best distance so far. Please check out the WØROO Repeater on 444.800+ (151.4 Hz tone or Fusion). Note!!! When I reset the repeater, the squelch tail was set to Ø. If you kerchunk the repeater, you will likely not hear anything until the repeater IDs. Please give your callsign and location anyway. Thanks to Neal Long who assisted with the new antenna field test and installation at the hospital. 73 de Rick, NJØP

Uncategorized

Post navigation

Previous Post: Yaesu Fusion DR-2X is On-the-Air
Next Post: JARA Annual Meeting

Repeater Status

OPERATIONAL – UHF
OPERATIONAL – VHF
OPERATIONAL – JARA Room (WIRES-X)
OPERATIONAL – JARA Room (Pi-Star)

Copyright © 2023 Jarbalo Amateur Radio Association.

Powered by PressBook WordPress theme